FERRULE GASKETS

MATERIALS OF CONSTRUCTION:
Filler Material: CAF
Inner Bending: SS301, 304, 316, 304L, 316L etc. as per customer Specification.

HEAT EXCHANGER GASKETS

Any dia, shape, plain & with any partition ribs configuration

TYPES:
Double Jacket Gaskets:

a) Plain Metal Clad
b) Corrugated Metal Clad

Double Jacketed with partition ribs:

Any configuration as per customer specification

Spiral Wound Gaskets:

a) With / without inner ring, with bare winding
b) With partition ribs-solid metal/Jacketed

Solid Metal Gaskests:
a) Plain metal gaskets
b) With partition ribs

STANDARDS:
IS7719,ASME B16,20BS33811,DIN

LENS GASKETS

MATERIALS OF CONSTRUCTION:
Soft iron,SS 304,316 etc

STANDARDS: DIN 2696

METAL JACKETED GASKETS
Gaskets of any size, diameter, pressure rating and shape

TYPES:
Single jacketed Gaskets
Double jacketed Gaskets
a) Plain MetalClad   b) Corrugated Metal Card

MATERIALS OF CONSTRUCTION:
Filler material: Asbestos, Graphite and Ceramic
Jacketing material: CRCA,ss304, 316,316L
Monel, Inconel, Aluminum, Copper, Brass etc

STANDARDS: ASME B16,20/ as per customer specification.

METAL O RINGS, CORRUGATED
METAL GASKETS & METAL SHIMS

MATERIAL OF CONSTRUCTION:
CRCA, Copper, Aluminum, SS etc,
STANDARDS: As per customer specification

NON METALLIC GASKETS
Any shape, any dia as per requirement

MATERIAL OF CONSTRUCTION:
CAF, PTFE, Graphite & Rubber
STANDARDS: ASMEB16.21, as per customer specification

PTFE ENVELOPE GASKETS

MATERIAL OF CONSTRUCTION:
CAF, PTFE
STANDARDS: As per customer specification

RING JOINT GASKETS

TYPES: R Oval, R Octagonal, RX, BX

MATERIAL OF CONSTRUCTION:
Soft Iron, SS304, 316 etc

STANDARDS: ASME B 16,20

SERRATED METAL GASKETS
Any dia & any thickness
Types: Serrated metal gasket

MATERIALS OF CONSTRUCTION: SS 304,304L,316,316L, Copper etc
STANDARDS: As per customer specification

SOLID FLAT METAL GASKSETS & DELTA GASKETS
Any dia, any shape, any thickness as per requirement.

MATERIAL OF CONSTRUCTION:
CRCA,SS, Monel, Inconel, Aluminum, Copper, Brass etc

STANDARDS: DIN 2697/ as per customer specification

SEALING RINGS
Any dia, any thickness can be made

MATERIAL OF CONSTRUCTION:
Soft iron, SS304, 316 Graphite

STANDARDS: As per customer specifications

SPIRAL WOUND GASKETS
Any dimension, pressure rating or shape.

Types:
Filler Gaskets
Spiral Wound Gaskets with outer Ring
Spiral Wound Gaskets with Inner Ring
Spiral Wound Gaskets with Inner & Outer Ring

MATERIALS OF CONSTRUCTION:
Filler Material : Compressed Asbestos Fiber (CAF), Graphite, PTFE
Winding material : AISI 304/304L/316/316L MONEL, Inconel etc
Ring material: Carbon steel AISI304/304L/316/316L MONEL, Inconel etc

STANDARDS:
IS 7719, ASME B16,20BS3381,DIN/ as per customer specification.

FLO-MECH Mechanical Seals
Type HTS-D-1001

Range of application
Temperature : From cryogenics to 260C
Pressure : Below atmospheres to 200 p.s.i.
Speed : 4500 RPM
Size : 3/8" to 6"

The HTS-D-1001 Series Seals are designed to handle clear liquids under normal PV conditions. The seals have a simple, compact design, are easy to install and practically need no maintenance. The seals incorporate robust construction for maximum durability and operational reliability. The HTS 1001 Series are unbalanced seals. The rotary unit is of compact design, consisting of multiple springs, dynamic secondary seal ring and seal face, all accommodated in a retainer.

Multiple Springs are used to avoid distortion at high speeds and ensure uniform pressure on seal faces under all operating conditions. Secondary Seal Rings are available in various forms such as 'O' rings, square rings, wedge etc and in various elastomers such as viton, neoprene, silicon, Buna-N, EPT, Teflon, GFT, Grafoil, etc. The mating faces can be of high grade carbon, stellite, tungsten carbide, ceramic, etc. depending on the service conditions.

FLO-MECH Mechanical Seals
Type HTS-2005

Range of application

Temperature : From cryogenics to 200C
Pressure : Below atmospheric to 750 p.s.i
Speed : 6500 RPM
Range : 3/8" to 4 1/2

The HTS 2005 Series are of balance type and designed to handle higher pressure applications. To accommodate the series a step is provided on the shaft sleeve to permit design provided on the shaft sleeve to permit design provided on the shaft sleeve to permit design technique of balancing off some of the hydraulic forces which tend to overload the seal faces.

LABYRINTH SEALS FOR ROTATING SHAFTS

Type 605 labyrinth seals are durable bushing type seals designed to minimize leakage of gases by using a closely controlled clearance between the floating labyrinth ring and a rotating shaft. The labyrinth seals temperature ranges are exceptionally wide since no elastomers are used. Their design also features a unique stabilizer ring with fins which minimize stress on the carbon ring thereby maintaining roundness of the labyrinth ring assembly. Dimensional tolerance of the critical inside diameter of the brushing ring is tightly controlled to minimize leakage variations.

Wheel Disk:

Slow Drive deep drawn wheel Disk for tyre firmer with C.R.C.A Steel Phosphate Coated/Shot Blasted with High Quality Painting.

Mud Guard Plate with Canvas

In a safety Fact Specially designed for various tillers made out of C.R.C.A. Sheet and formed with a special Die tool. Phosphate Coated/Shot Blasted and painted with high quality paints.

Fuel Tanks

C.R.C.A. steel tanks Designed for vehicle-mounting Rectangular/ square provides optional Space economy for diesel / petrol fuel. Federal Highway administration labeled, constructed of minimum 10 liters. Steel threaded fill neck &cap mount tanks Right or Left hand mounted Bracket. Pressure tested& phosphate Coated/Shot Blasted with Painting. Manufacturing with advanced Technology.

Protection and Radiator Covers

For economic space utilization of various power tillers and other vehicles Engine Radiator-Protection Radiator Covers Design, Manufacturing and supplying with extra quality Care formed with CRCA steel sheet with Phosphate Coated and painted with high quality paints.

FORK

Auto Rickshaw-Front Drive Fork-Left Hand &Right Hand Formed with special dies with EN 32 A–Steel. Phosphate Coated/SHOT Blasted with proper painting.